Gulf Oil and Gas accountACCOUNT

Flowserve Expands its Range of Durco® Mark 3 ISO HP Pumps

Source: www.gulfoilandgas.com 6/12/2015, Location: Europe

Flowserve Corporation, a leading provider of flow control products and services for the global infrastructure markets, announced at the ACHEMA 2015 World Forum of the Process Industry in Frankfurt, Germany, that it has expanded its line of Durco Mark 3 ISO chemical process pumps with a range of higher-pressure variants.

The release of the higher-pressure pumps comes at a time of increasing demand from major chemical companies and refineries for ISO 2858 and ISO 5199 pumps rated up to 25 bar.

"The introduction of higher-pressure variants to the Durco Mark 3 ISO pump line is in response to an industry move to higher operating temperatures in some chemical processes and an increased focus on process safety," said Bob Hendricks, President, Industrial Pump Operations. "The Flowserve design team has expanded the coverage of its well-established Durco Mark 3 ISO range while retaining the benefits of reliability, ease of maintenance and low total cost of ownership - the hallmarks of this pump line."

The sealed Durco Mark 3 ISO pumps are designed to operate up to a pressure rating of 16 bar. The new high-pressure casings match the hydraulic performance, dimensions and branch location of the standard casing. However, by the use of 3-D modeling and finite element analysis, the pressure rating of the pump is increased up to 25 bar, dependent on material and temperature, with minimal increase in weight. In addition to the casing, all other pressure-containing parts are also rated up to 25 bar. The pumps are available in a wide range of materials, including carbon steel, stainless steel, and reactive alloys such as titanium and zirconium.

Available in more than 30 models as foot- and centerline-mounted casings, these high-pressure pumps are fully compliant with ISO 2858 duty conditions and dimensional requirements. The high-pressure casings and associated components have been designed for use with the sealed Durco Mark 3 ISO power end components to ensure a high degree of interchangeability, thereby minimizing spare parts inventory.

Durco Mark 3 ISO pumps have capacities up to 1,400 m3/hour (6,160 U.S. gpm) and heads to220 m (720 ft.). Discharge nozzle sizes range from 32 mm (1.25 in.) to 200 mm (8 in.) and operating temperatures from -80 °C (-110 °F) to 400 °C (752 °F). The efficiencies and NPSHR of the higher-pressure variants are the same as the sealed Durco Mark 3 ISO with ISO 2858 compliant hydraulics.

The Durco Mark 3 ISO higher-pressure pump range is CE marked, compliant with all applicable European Directives such as the Machinery Directive and ATEX, and also has GOST certification.

Flowserve will highlight the Mark 3 ISO pump at ACHEMA stand B63.

High Pressure Pumps News in Germany >>

Norway >>  10/19/2020 - TechnipFMC has been awarded a significant(1) Engineering, Procurement, Construction and Installation contract by Equinor for the Breidablikk Pipelay, ...
Austria >>  10/8/2020 - The 2020 OPEC World Oil Outlook (WOO) was launched in Vienna, Austria, providing the OPEC Secretariat’s in-depth look at the unprecedented scale and i...

Norway >>  10/1/2020 - Aker Solutions won an order from ConocoPhillips to deliver the subsea production system for the Tommeliten Alpha development offshore Norway. The esti...
Netherlands/Holland >>  9/30/2020 - TechnipFMC has been awarded a significant(1) contract by Shell Moerdijk for the Engineering, Procurement and module Fabrication (EPF) for proprietary ...

Norway >>  9/28/2020 - Aker Solutions has been awarded a contract from Equinor for the delivery of a subsea production system for the Breidablikk development in the North Se...
Norway >>  9/28/2020 - Continuing its track record of more than two decades of successful delivery for Equinor, Wood has been awarded a contract to provide EPCI (engineering...

Related Categories: Axial Flow Pump  Deep Well Pumps  Fire Certified Pump, Portable & Wheeled  Fire Certified Pump, Skid mounted  General  High Pressure Pumps  Horizontal Centrifugal End Suction Pumps  Horizontal Split Case Pumps  Hydraulic Pumps  In-Line Pumps  Magnetic Coupled  Mixed Flow Pump  Mud Pumps  Multistage Horizontal Centrifugal  Plastic Pumps  Self Priming Pumps  Slurry Pumps  Submersible Pumps  Vacuum Pumps  Vertical Centrifugal Pump  Vertical Pumps w/ Cardan Shaft  Vertical Split Case Pumps  Vertical Submerged Pumps 

Related Articles: Deep Well Pumps  General  High Pressure Pumps  Horizontal Centrifugal End Suction Pumps  Hydraulic Pumps  Magnetic Coupled  Multistage Horizontal Centrifugal  Submersible Pumps  Vacuum Pumps  Vertical Centrifugal Pump  Vertical Pumps w/ Cardan Shaft 


Germany Oil & Gas 1 >>  2 | 3 | 4 | 5 | 6 |

More News

Related Links

Gulf Oil and Gas
Copyright © 2020 Universal Solutions All rights reserved. - Terms of Service - Privacy Policy.