|
Polyethylene Blow Mould Grade HD5403EA (Standard unmodified except for antioxidant), Melt Flow rate (2.16 kg): 0.35 g/10 min, Test Method: ISO 1133, D...
|
|
|
Polyethylene Blow Mould Grade HD5502GA (Gas phase process), Compression Ratio: 2.6:1, 1 Liter Bottle, Melt Flow rate (2.16 kg): 0.2 g/10 min, Test Met...
|
|
|
Polyethylene Film Grade HD 5301FB (Lowgel Film), Thickness: 15 microns, Blow up Ratio (100*1.2 mm die): 5:1, Max Output Rate: 50 kg/hr, Melt Flow rate...
|
|
|
Polyethylene Film Grade LL 0209AA (Stabilization), Thickness: 38 microns, Blow up Ratio (150*2.3 mm die): 2:1, Max Output Rate: 50 kg/hr, Melt Flow ra...
|
|
|
Polyethylene Film Grade LL 0209KJ (High Slip Antiblock), Thickness: 38 microns, Blow up Ratio (150*2.3 mm die): 2:1, Max Output Rate: 50 kg/hr, Melt F...
|
|
|
Polyethylene Film Grade LL 0220AA (Stabilization), Thickness: 38 microns, Blow up Ratio (150*2.3 mm die): 2:1, Max Output Rate: 50 kg/hr, Melt Flow ra...
|
|
|
Polyethylene Film Grade LL 0220KJ (High Slip Antiblock), Thickness: 38 microns, Blow up Ratio (150*2.3 mm die): 2:1, Max Output Rate: 50 kg/hr, Melt F...
|
|
|
Polyethylene Injection and Roto Moulding Grade HD3840UA (UV Stabilization), Melt Flow rate (2.16 kg): 4 g/10 min, Test Method: ISO 1133, Density: 938 ...
|
|
|
Polyethylene Injection and Roto Moulding Grade HD5211EA (Standard unmodified except for antioxidant), Melt Flow rate (2.16 kg): 11 g/10 min, Test Meth...
|
|
|
Polyethylene Injection and Roto Moulding Grade HD5218EA (Standard unmodified except for antioxidant), Melt Flow rate (2.16 kg): 18 g/10 min, Test Meth...
|
|
|
Polyethylene Injection and Roto Moulding Grade HD5226EA (Standard unmodified except for antioxidant), Melt Flow rate (2.16 kg): 26 g/10 min, Test Meth...
|
|
|
Polyethylene Injection and Roto Moulding Grade HD5740UA (UV Stabilization), Melt Flow rate (2.16 kg): 4 g/10 min, Test Method: ISO 1133, Density: 957 ...
|
|
|
Polyethylene Injection and Roto Moulding Grade HD6070UA (UV Stabilization), Melt Flow rate (2.16 kg): 7.5 g/10 min, Test Method: ISO 1133, Density: 96...
|
| Petrochemicals Polyethylene |
