Gulf Oil and Gas
accountaccount
Endless Creations Company

Endless Creations Company


Company Home address
Company Profile

Catalog Index
Catalog Index

Products/ Services List
Products /Services

Contact Details
Contact Details

E-Mail Address
Request Information

Spin-Clean Centrifugal Oil Filter
Separators


Spin-Clean Centrifugal Oil Filter
Spin-Clean is Fluid Power Energy’s lube oil cleaning centrifuge, today’s most cost effective solution for extending oil change intervals and reducing hazardous waste.
WHAT IS SPIN-CLEAN?
Spin-Clean is a true centrifuge that, when sized properly, will remove the wear abrasives from the oil down to less than one micron. This will reduce engine wear a minimum of 40 - 50%. The properly sized centrifuge recommended for your engine will not use more than 10% of the engine oil pump output. (10% is the acceptable measure by engine manufactures for by-pass (side stream) oil cleaning.) The 10% taken to supply the Centrifuge does not negatively impact the oil demanded by the engine.
The lube oil cleaning Centrifuge removes the solids from the engine oil using centrifugal force, a force of 1000 “G’s”, or 1000 times the force of gravity. These solids are stored inside of the rotating turbine bowl, which will hold more than 10 times the solids than your engines full-flow filters. The act of exposing the oil to 1000 “G’s” is what results in micron removal less than one. Once the particles have been removed the clean oil is then returned to the oil pan.
WHY RUN SPIN-CLEAN?
Engine Manufacturers typically install full-flow filters that only remove particles from oil down to 20 - 25 micron. With the addition of Spin-Clean, particles below 1 micron are removed, thus significantly increasing engine life. Time between oil change intervals is also increased saving the user time & money. Equally as important, the addition of Spin-Clean to an engine/package will significantly reduce hazardous waste, positively impacting our environment.
IMPORTANCE OF CLEAN OIL
Oil is the life-blood of an engine and the cleanliness of that oil can directly impact the efficiency of the engine, life of the engine, and environment. When properly sized, Spin-Clean cycles the engine oil 4 times per hour ensuring proper solid particle extraction. With proper maintenance, Spin-Clean will increase engine life & oil change interval up to, but not limited to, 40 – 50%. Another Spin-Clean benefit, often overlooked, is its use as a diagnostic tool. The waste material extracted from the oil can be analyzed for several engine related problems. (ex. Coolant leaks)
For further information, please visit www.fpevalves.com
Variation #1 PN
     Qty
Filtration, Separation » Separators »
Gulf Oil and Gas
Copyright © 2020 Universal Solutions All rights reserved. - Terms of Service - Privacy Policy.