Horizontal Centrifugal Main Pump Assay C/W Electric Motor
Pumps: Centrifugal
Reference BID7657
Date 4/8/2009
Location Middle East
Scope
Ref. No.: 96-09-3901
Issue Date: 08/04/2009
Bid Closing Date: 01/05/2009
Fee: 600 USD
Bid Bond: 1% From the total value of tender price
Offer Validity: 120 days from the Bid Closing Date
Bond Validity: 90 days from the Bid Closing Date
Company: South Oil Company (SOC)

Scope of Work:
Supply of # 2 horizontal centrifugal main pump assay C/W electric motor including local starter and control panel; suction & discharge (M.O.V) valves, instrument gauges and all accessories on skid as the following Pump specifications:
Capacity: 350 m3/h.
Head: 270 m.
Suction pressure: 7 kg/cm2
Liquid handled: crude oil. S.G: 0.84
Operating temp =55°c
Type of seal: mech seal (flow serve or equivalent) plan 31
Type of coupling: flexible coupling metastream
Casing: radial split
Materials: API stander 610. S8 last addition
Valves (M.O.V) syncro back 380 v, 50 hz
Suction nozzle = 12", discharge nozzle = 8"
Number of stages =2 stages
Pump efficiency greater than 70 %
Drain and vent valves flanged drain connection.

Electrical specifications:
Horizontal induction motor 3 phase, 11000 v, 50 hz, Explosion proof EX -d 11 AT3, Insulation class f, Ambient temp. 55 °c, Duty: continues, Enclosure TEFC: IP code 55, Self ventilation standard motor protection, RPM = 2984, Connection: Star, Power factor: 0.9, Original of motor (Ansaldo, Genova Italy), Wr2 = 19.5 kg m2, 435 kw, 27, 3 a, IP 55, Type: ET 630 l 2, S/N: 63277.

Control system:
The pump should be provide with complete control and protection system as below:
1- Two transmitters with receivers for suction and discharge lines.
2- Two pressure switches & gauges for suction and discharge lines.
3- RTD's with receivers for pump casing and bearings and for electrical motor winding and bearings.
4- Vibration system (monitor and pickups).
5- Control panel to operated locally and remote.
7- Seal leakage to detection system.

Recommended spare parts (mechanical and electrical) for two years operation must be included.
Four sets of maintenance and spare parts catalogue must be included.
Training for three engineers from (S.O.C.) and wittiness for three engineers at the performance test on the supplier account (for all cost) must be included.
Training for three engineers from (S.O.C.) and wittiness for three engineers at the performance test on the supplier account (for all cost) must be included.

Origin: Italy
Pumps: Centrifugal
Related Prooducts: Pumps: Centrifugal Axial Flow Pump Deep Well Pumps Fire Certified Pump, Portable & Wheeled Fire Certified Pump, Skid mounted General High Pressure Pumps Horizontal Centrifugal End Suction Pumps Horizontal Split Case Pumps Hydraulic Pumps In-Line Pumps Magnetic Coupled Mixed Flow Pump Mud Pumps Multistage Horizontal Centrifugal Plastic Pumps Self Priming Pumps Slurry Pumps Submersible Pumps Vacuum Pumps Vertical Centrifugal Pump Vertical Pumps w/ Cardan Shaft Vertical Split Case Pumps Vertical Submerged Pumps
Related Tenders: Fire Certified Pump, Portable & Wheeled Fire Certified Pump, Skid mounted General High Pressure Pumps Horizontal Centrifugal End Suction Pumps Horizontal Split Case Pumps Hydraulic Pumps Mud Pumps Self Priming Pumps Submersible Pumps Vacuum Pumps Vertical Centrifugal Pump Vertical Submerged Pumps

Related Articles

For Buyers
For Suppliers
Gulf Oil and Gas
Copyright © 2021 Universal Solutions All rights reserved. - Terms of Service - Privacy Policy.