Workover Rig Services

Workover Rigs/Services
Reference BID8344
Date 6/24/2009
Location Africa
Scope
Ref. No.: C-03524
Issue Date: 24/06/2009
Bid Closing Date: 16.00 Hrs, 12th July 2009
New Bid Closing Date: 21-Nov-2010
Address response: Petro-Canada Oil (North Africa) GmbH, Khallad Ben Suweed Street, Quadisya Square, Tripoli, Libya
E-mail address: libyaC& P@petro-canada.com

Scope of Work:
Petro-Canada Oil (North Africa) GmbH hereby requests “Expression of Interest” (EOI) from qualifying Contractors for the provision of Workover Rig Services in support of Petro-Canada’s exploration campaign in the Sirte Basin of Libya.

The overall program for the workover rig is anticipated to comprise of the well testing of a portion of the 49 Exploration / appraisal wells to be drilled over the next 3 years.

These wells test will comprise of standard DST strings, retrievable completions or retrievable ESP completions. In addition to the exploration and well testing program of work, it is further anticipated that a number of previously drilled wells will require re-entry for further investigation. The scope of work on these wells may include re-testing, stimulation, workover of existing completion, casing repair and drill out to a deeper interval.

Mobilisation for the workover rig is estimated to be end of the 1st quarter of 2010 and the contract duration will be 3 years.

Any contractors providing “Expression of Interest” must as a minimum provide the following information:

A) Copies of Libyan Company Registration Documents (Libyan Tax Registration/Libyan Company Registration/Libyan Permit to Work)
B) Details of experience in providing land drilling rig services and ancillary equipment.
C) Details of Health, Safety and Environment Management programs in place.
D) Confirmation of workover rigs that are currently available in Libya.
E) Workover Rigs that will be available in Libya Q1 2010.
F) If a workover rig is in the process of being imported to Libya it must be confirmed that permission to import the specific rig has been granted by NOC.
G) Confirmation whether the available rigs meet the following minimum requirements:

Desert Capable Workover / Service Rig:
a) Workover Rig – 750 HP – 14,000 ft depth capability
b) Hook Load – 300,000 lbs
c) BOP’s – 11” 10k
d) Racking capacity - +/- 185 stands 3.˝” Tubing
e) String of 3-1/2” Drillpipe - +/- 12,000 ft
f) Associated heavyweights and collars
g) Fluid Tank System – 1,500 bbls volume
h) Mixing Tanks
i) Trip Tank
j) Mud / Fluid Pump System
k) Filter Unit – 2 microns
l) Choke Manifold – 3.?” 5 or 10k WP
m) Handling Tools for various pipe sizes (tubing & drillpipe)
n) Swab line and equipment
o) Certified Lifting Gear
p) Crane – maximum – 30 tonnes
q) Fork Lift – 7 tonnes
r) Full Set of Safety Equipment and Fire Fighting equipment
s) Rig site offices and accommodation for Rig Superintendent & Operator Co. Rep
t) Quick move Camp – minimum 30 persons c/w kitchen and laundry facilities, power generation, Satellite Communications (Telephone, Internet, Television), Leisure facilities
u) Provision of suitably qualified and experienced personnel to supervise and control completion and workover operations.
Workover Rigs/Services
Related Prooducts: Workover Rigs/Services Artificial Lift Cementing, Stimulation Directional Drilling Drilling Drilling Engineering & Equipment Systems Enhanced Oil Recovery General Logging, Perforating, Testing Offshore Drilling Reservoir/Completion Consultants Workover & Well Services Workover Rigs/Services
Related Tenders: Artificial Lift Cementing, Stimulation Directional Drilling Drilling Drilling Engineering & Equipment Systems Enhanced Oil Recovery General Logging, Perforating, Testing Offshore Drilling Reservoir/Completion Consultants Workover & Well Services Workover Rigs/Services

Related Articles

For Buyers
For Suppliers
Gulf Oil and Gas
Copyright © 2021 Universal Solutions All rights reserved. - Terms of Service - Privacy Policy.