Foam Seal, Roof Drain Hose for Storage Tank

Rubber Hoses
Reference 131/2011/A
Date 3/11/2012
Location Middle East
Scope
Technical specifications of foam seal and roof drain hose for storage tanks

- Foam Seal

General Information:

The seal to be used on floating roofs, open type externally.

The seal design shall be used on tank design 46 meters min diameter containing the full range of crude oil
and generally used with asphaltic and waxy crude.

Complete Foam seal including all required envelope; foam. Adhesive and metal parts (excluding
weather shields).

Design feature:

The seal is designed to enable installation and removal to be carried out from the top of the roof and vertical mounting.

The sealing effect between the roof and tank shall is achieved by the use of special octagonal foam sections/35/cm in diameter and /2/ M long approx, the foam sections are held in position by an internal hold down plate.

The position of the seal in service, whether it is in contact With the stored product or held above the stored product, is determined by the top bolting position.

The hold down plates and foam sections are encapsulated within synthetic rubber coated nylon sealed envelope.

The seal envelope is produced from a highly abrasion resistance coated fabric material to obtain the most sealing effect.

The width of seal envelope is/110/cm and long as the circle of each tank in additional of /15/M long
apptox, and without any holes.

All the metal parts of seals should be galvanized Steel.

Nominal rim spaces between (200-300) mm.

Clamp bar should be in one hole, and length of bolting is 5cm.

Services life: 10-1 5 years.

Type: Floating roof / Storage tanks / Double deck
Capacity/m3/:20.000
Diameter/m/:46
Qty sets: 4

- Roof Drain Hose

General information:

Roof drains/3/in D, heavy duty

A hose designed to meet the special conditions required for total immersion in crude oil for long periods.

The hose is constructed from special compounded rubber with synthetic fiber and steel reinforcement

Design features:

Hose to be suitable for /50/ psi working pressure and for 50%aromatic.

Flexible wire inserted with built in steel nipple and flanges ANSI CLASS 150RF, with lead ballast cable and clevis pin and clamp

Hose electrically continuous

Type: Floating roof / Storage tanks / Double deck
Tank diameter/m/:46
Capacity/m3/:20.000
Tank high/m/:17
Qty: 4



Bidding Information

Bid Bond 700 Euro
Offer Validity 180 days
Documents Price 50 Euro
Rubber Hoses
Related Prooducts: Rubber Hoses Anchors CPVC Pipes General GRP Pipes Hydraulic Hoses Iron Pipes Metallic Hoses PE Pipes Pigs Pipe Cleaning Equipment Pipe Drilling and Tapping Pipe Inspection & Testing Equipment Pipe Lining, coating & insulation Pipe Locating Equipment Pipe Repair Pipe, Casing & Tubing Pipeline Heating Equipment Piping Accessories Plastic Pipes PP Pipes PTFE Rods PVC Pipes PVDF Pipes Rubber Hoses Stainless Steel Stainless Steel rods Steel Pipes
Related Tenders: Anchors General GRP Pipes Hydraulic Hoses Iron Pipes Metallic Hoses PE Pipes Pigs Pipe Cleaning Equipment Pipe Drilling and Tapping Pipe Inspection & Testing Equipment Pipe Lining, coating & insulation Pipe Locating Equipment Pipe Repair Pipe, Casing & Tubing Piping Accessories PTFE Rods Rubber Hoses Stainless Steel Stainless Steel rods Steel Pipes

Related Articles

For Buyers
For Suppliers
Gulf Oil and Gas
Copyright © 2023 ICT All rights reserved. - Terms of Service - Privacy Policy.