Supply of Electronic PBX

The company bids for supply of most modern electronic PBX with an estimated cost of USD 436,750.

Complete electronic PBX with following feature:
- Extension line :2000(1600 analogue line,96 digital line, 96 co-trunk, 180 channel E1,28 IP phone line)
- Four digits
- Maximum of two cabinets only. Each cabinet content 1000 extension line.
- line power required :line voltage (48–60)vdc
Ringing voltage(70-90)Vac
- Dialing type: DTMF and pulse.
- Two operator and maintenance console with there cable each one 20 meter, used headset (microphone &speaker)as well as handset.
- programming from computer HP LAPTOP and maintenance console.
- one most modern printer connects with PBX to print report of diagnostic and problems.
- duplicated common control and power supply
- power supply 220V/50HZ with UPS 8 Hour operation in case of failure.
- complete protected MDF type voltage protects(2000 fuses).
- All MDF connected cable (each one 20 meter)
- caller ID display for all telephone line and caller ID controller
- voice mail
- SMS sending
- Missed call
- auto attendant for cabinets
- VOIP phone.
- CTI computer telephone integration.
- Can use many kinds of terminals (analogue phone, digital phone,IP phone, WIFI handset, IP Soft phone, and PC)

Spare Pare Parts for Three Years

- analogue telephone set with display (1000)
- digital telephone set with display (150)
- VOIP/IP phone with color display(wififeature)(40)
- E1/PRI(30-CH)(6)
- spare parts 20% of total capacity for all cards and component of PBX
- operator console (10)
- headset for console (10)
- motherboard for cabinet (2)
- power supply (10)
- MDF fuses type over voltage (500)
- impact and punch down tool (10)
- Telephone cable 25 pair(25×22:0.5mm) (500meters )

NOTES:
* this PBX used to covered 2500meter distance between PBX and extension, our cables core size 1mm,1.3mm
* must be provided us the system layout attached with the offer and all the system hardware for PBX is centralized at one place.
* Model of PBX most be in the same of provided years (most modern).
- All documentation of installation and programming and maintenance
- complete bag tools for installation , MDF connectors, maintenance servicing (soldering equipment 220vac/50watt, multimeter,......etc.).