Supply of Oil Soluble Demulsifier for Kathaloni

Corrosion Products/Services
Reference SSG1716P17/01
Date 7/14/2016
Location Asia
Scope
The company invites bids for the supply of Qty= 300000 KG, Oil Soluble Demulsifier (OSD) for use at Kathaloni OCS.

* The Physical Characteristics are as follows:-
a) Appearance: The product should be completely homogeneous, free flowing liquid between temperatures 5 Degree C and 45 Degree C. It should be free of any insoluble matter, and should not be foul smelling.
b) Solubility: Should be soluble in dry crude oil, and also in water-in-crude emulsions containing between 10 to 60% water.
c) Flash Point: 50 Degree C minimum (PMCC Method).
d) Compatibility: The product should be non-corrosive; it must have pH between 6 & 8, and must be compatible with all materials of construction, including alloys.
e) Shelf Life: 12 Months minimum.

* Performance:-
a) Laboratory: From a representative crude emulaion collected on the same day from Kathaloni OCS, the product should be able to separate at least 60% water within 30 minutes and 95% water within 90 minutes at 60 Deg. C in a conventional laboratory bottle test: at a dosage normally not exceeding 120 PPM and also not exceeding that of a field proven product giving specified water separation under identical test conditions. The separation should be clear and distinct without any water or all droplets remaining in the other phase, or any sludge formation at the interface. The separated water should be clear, and should not contain more than 500 PPM of oil, as measured spectrophotmetrically.
b) Field : This product will be used at Kathaloni OCS where it has to bring down the water content in crude below 1 (one) percent in the emulsion Treater (ET) Vessel itself, at a dosage normally not exceeding 120 PPM, and also not exceeding that of a standard, field -proven product effectively working under identical field conditions. The oil content in separated water from ET outlet should be less than 500 PPM, and should also compare favorably with that given by the standard product. The supplied material against normal orders will be accepted after its passing the specification test in the laboratory upon arrival at Duliajan.

* Packing: 180-200 kg. nett in new epoxy coated M.S.Drum. Demulsifier for Kathaloni OCS should be stenciled on every drum in bold letter followed by name of the Products, Supplier.s name, order No. Batch No. and Date of Manufacture.

Bidding Information

Bid Bond USD 17,650.00
Bond Validity 214 days
Offer Validity 120 days
Documents Price USD 500.00
Corrosion Products/Services
Related Prooducts: Corrosion Products/Services Camp Building Cleaning Equipment, Services Communication Corrosion Products/Services Development Exploration Food Supplies General Labor Services Land & Leasing Mine Clearance Oil & Gas Companies Production Service Companies Skilled Labors Transportation, 4X4 Trucks Unskilled Labors Utility Systems Waste Disposal Water Supply Services Welding Products/Services
Related Tenders: Camp Building Cleaning Equipment, Services Communication Corrosion Products/Services Development Exploration Food Supplies General Labor Services Mine Clearance Oil & Gas Companies Production Service Companies Skilled Labors Transportation, 4X4 Trucks Unskilled Labors Utility Systems Waste Disposal Water Supply Services Welding Products/Services

Related Articles

For Buyers
For Suppliers
Gulf Oil and Gas
Copyright 2023 ICT All rights reserved. - Terms of Service - Privacy Policy.