Gulf Oil and Gas accountACCOUNT
Supply of Double Pack Off Flanges
Flanges
Reference SSG1704P17/03
Date 7/13/2016
Location Asia
Scope The company invites bids for the supply of the following items:-

* Item 001 Qty= 4 SET, Double Studded Double Pack-off adapter flange, per API SPEC 6A (Latest Edition), U-AA, PSL-3 with following configuration.
Double Studded Double Pack-off adapter flange for installation over 279.4mm (11")x 352 kg/sq.cm (5000 psi) W.P rated top flange of the casing head spool with design as under:
- Top & Bottom Preparation: 279.4mm (11')x 352 kg/sq.cm (5000 psi) W.P. rated studded & stainless steel or incol 625 lined ring grooved for RX-54 ring joint gasket. Both top & bottom ends should be complete with cadium plated studs & nuts. The flange should be complete with two injection ports for inserting plastic packing & two testing ports (one to open between the pack offs & other open at the bottom annulus area of the flange) facilities complete with requisite port valves and seals installed.
- Pack-off: Double, X-type pack-off, energized by injecting plastic packinks through injection port to seal & pack-off 139.7mm (5.1/2 OD API casing.
- Height: As per API specification 6A but restricted to maximum of 5" 127mm). Accessories for above Flange:
a) Extra Pack of Seals 02 nos.
b) Plastic packing injection gun- 01 No.
c) Set of Plastic packing-02 nos.

* Item 002 Qty= 3 SET, Double Studded Double Pack-off adapter flange,per SPEC 6A (latest Edition)U-AA,PSL-3 with following configuration:
Double Studded Double Pack-off adapter flange for installation over 279.4mm (11")x 704 kg/sq.cm (10000 psi) W.P rated top flange of the casing head spool with design as under:
- Top & Bottom Preparation: 279.4mm (11') x 704 kg/sq.cm (10000 psi) W.P. rated studded & stainless steel or incol 625 lined ring grooved for BX-158 ring joint gasket. Both top & bottom ends should be complete with cadium plated studs & nuts. The flange should be complete with two injection ports for inserting plastic packing & two testing ports (one to open between the pack offs & other open at the bottom annulus area of the flange) facilities complete with requisite port valves and seals installed.
- Pack-off: Double, X-type pack-off, energized by injecting plastic packinks through injection port to seal & pack-off 139.7mm (5.1/2 OD API casing.
- Height: As per API specification 6A but restricted to maximum of 6.25" 159mm).
- Accessories for above flanges:
a) Extra Pack of Seals 02 nos.
b) Plastic packing injection gun-01 No
c) Set of Plastic packing-02 nos.

* Item 003 Qty= 10 SET, Double studded Double Pack-off adapter flange, per API SPEC 6A (Latest Edition), U-AA, PSL-3 with following configuration.
- Top preparation: 11" x 5000 PSI W.P. rated, Studded & grooved for Rx-54 ring joint gasket. Top end should be complete with cadmium plated studs & hexagonal nuts.
- Bottom preparation: 11" x 5000 PSI W.P. rated, Studded & grooved for Rx-54 ring joint gasket. Bottom end should be complete with cadmium plated studs & nuts.
- Pack-off: Double pack off with two molded elastomer P-seals or equivalent energized by inserting plastic packing to pack-off 7" OD API casing.
- Injection and testing port: Flange must have injection ports for injecting plastic packing and a test port for pressure testing purpose (testing port facilities should include requisite port Valves installed)
- Accessories for above flanges:
a) Extra Pack of Seals 02 nos.
b) Plastic packing injection gun-01 No
c) Set of Plastic packing-02 nos.

* Item 004 Qty= 7 SET, Double studded Double Pack off adapter flange per API SPEC 6A (Latest Edition), U-AA, PSL- 3 with following configuration.
- Top preparation: 11" x 10000 PSI W.P. rated, Studded & grooved for BX-158 ring joint gasket. Top end should be complete with cadmium plated studs & hexagonal nuts.
- Bottom preparation: 11" x 10000 PSI W.P. rated, Studded & grooved for BX-158 ring joint gasket. Bottom end should be complete with cadmium plated studs & nuts.
- Pack-off: Double pack off with two molded elastomeric P-seals or equivalent energized by inserting plastic packing to pack-off 7" OD API casing.
- Injection and testing port: Flange must have injection port for injecting plastic packing and a test port for pressure testing purpose (testing port facilities should including requisite port Valves installed)
- Accessories for above flanges:
a) Extra Pack of Seals 02 nos.
b) Plastic packing injection gun-01 No
c) Set of Plastic packing-02 nos.

Bidding Information

Bid Bond USD 1,970.00
Bond Validity 214 days
Offer Validity 120 days
Documents Price USD 100.00
Flanges
Related Prooducts: Flanges Flanges Forged Steel Gaskets General High Pressure Connection Iron Fittings Lined Fittings Manhole covers/ grates Manifold Plastic Fittings Stainless Steel Fittings Steel Fittings Welding Fitting
Related Tenders: Flanges Gaskets General Manifold Stainless Steel Fittings Steel Fittings

Related Articles

For Buyers
Advertise your Purchasing Requests

For Suppliers
Promote your Products
Gulf Oil and Gas
Copyright 2019 Universal Solutions All rights reserved. - Terms of Service - Privacy Policy.