Supply of Stainless Steel X-Mass Tree Assembly

The company announces its need for supply of stainless steel x-mass tree assembly, 65.08mm vertical bore, 52.38mm horizontal bore, single string, double arm, double master valve, material class cc-general service, as per api-6a latest edition, temperature rating u, psl-1, wp-352 kg/cm².

Stainless steel X-mass tree assembly, single string, double arm, double master Valve, WP 352 Kg/ Sq.C.2. 9/16# (65.08 mm) vertical bore 2.1/16"(52.38mm) Outlet (horizontal) bore, as per API 6A, 17th (or latest) edition, Material class CC-General Service, Temperature rating U PSL-1, consisting of the following :

1. Gate Valve 65.09 mm x 352 Kg/Cm2 (2.9/16" x 5000 PSI ) WP as per API 6A latest edition, flanged end, full bore through conduit having solid gate construction with
floating seat and parallel expanding gate with replaceable seat, non-rising stem supported on two thrust bearings, back seat arrangement with plastic packing and grease injecting port, complete with hand wheel. - 3 nos.

2. Same as Item No. 1 above but 52.38 mm x 351.54 Kg/Cm2 (2.1/16" x 5000 PSI) WP - 2 Nos.

3. Same as Item No. 1 above but 52.38 mm x 351.54 Kg/Cm2 (2.1/16" x 5000. PSI) WP and screwed end API LP female - 02 Nos.

4. Adaptor Spool, 65.08 mm x 351.54 Kg/Cm2 (2.9/16" x 5000 PSI) WP. studded top x 79.38 mm x 351.54 Kg/Cm2 (3.1/8" x 5000 PSI) WP open flanged bottom minimum height 200 (8") m. -01 No.

5 .Cross, 65.08 mm x 351.54 Kg/Cm2 (2.9/16" x 5000 PSI) vertical full bore x 52.38 mm x 351.54 Kg/Cm2 (2.1/16" x 5000 PSI) WP side open flanged ends, 12.70 mm (1/2") NPP tapping at the centre -01 No.

6. Cap, 65.08 mm x 351.54 Kg/Cm2 (2.9/16"x 5000 PSI) WP 6B flanged bottom and top with 73.03 mm (2.7/8" OD EUE 8 RD API tubing lift threads complete with union 4 ACME treaded cap tapped 12.70 mm (1/2") NPT. -01 No.

7. Positve choke, 52.38 mm x 351.54 Kg/Cm2 (2.1/16" x 5000 PSI) WP flanged end inlet and 53.38 mm x 351.54 Kg/Cm2 (2.1/16" x 5000 PSI) WP aPI LP threaded outlet
complete with 12.70 mm (1/2") NPT blanking plug bonnet assembly complete with bean adaptor. - 02 Nos.

8. Ring Joint Gasket, RX-24, SS-316 for Sl. No. 1/Metallurgy shall be conforming to Sl.No. 2 - 04 Nos.

9. Ring Joint Gasket, RX-27, SS-316 for Sl. No. 1/Metallurgy shall be conforming to Sl.No. 1 - 04 Nos.

10. Ring Joint Gasket, RX-35, SS-316 for Sl.No. /Metallurgy shall be conforming to Sl.No. 4 - 02 Nos.

11. 25.4 mm x 165.10 mm (1" x 6.1/2") long studs with two hexagonal nuts, cadmium plated - 24 Nos.

12. 25.4 mm x 165.10 mm (1" x 6.1/2") long studs with one hexagonal nuts cadmium plated - 08 Nos.

13. 22.23 mm x 158.75 mm (7/8" x 6.1/2") long studs with two hexagonal nuts, cadmium plated - 32 Nos.

14. Needle Valve, angle type 12.70 mm x 351.54 Kg/Cm2 (1/2" x 5000 PSI) WP male x female NPT ends - 02 Nos.

15. Needle Valve, straight type 12.70 mm x 351.54 Kg/Cm2 (1/2" x 5000 PSI) WP male x female NPT ends - 02 Nos.

16. Nipple 52.80 mm x 203.2 mm (2.1/16" x 8") long double pin extra strong seamless nipple API LP threaded with 12.70 mm (1/2") NPT tapping at the middle of the nipple 351.54 Kg/Cm2 (5000 PSI) WP - 02 Nos.

17. Tee, 50.80 (2") nom. Dia 351.54 Kg/Cm2 (5000 PSI) WP API LP female threads - 02 Nos.

18. Bull plug, seamless 50.80 mm (2") nom dia 351.54 Kg/Cm2 (5000 PSI)WP. API LP male threaded ends x 152.5 mm(6")long - 02 Nos.

19. Hammer Union WECO type 50.80 mm (2") 351.54 KG/Cm2 (5000 PSI) WP screwed to API LP threads - 01 No.

20. Nipple, double extra strong, 50.80 mm x 351.54 Kg/Cm2 (2"" x 5000 PSI) WP with 50.80 mm (2") API LP threaded ends of required length - 06 Nos.

21. Nipple same as Item No. 20 - 01 No.

22. Nipple same as Item No. 20 - 01 No.

23. Pressure Gauge, 0-351.54 Kg/Cm2 (0-5000 PSI) WP with 12.7 mm (1/2")-04 Nos. NPT pin bottom suitable for WOG

24. Bean Wrench - 01 No.

25. Bean Size 1.5 mm -01 No.

26. Bean Size 2.0 mm -01 No.

27. Bean Size 2.5 mm -01 No.

28. Bean Size 3.0 mm -01 No.

29. Bean Size 3.5 mm -01 No.

30. Bean Size 4.0 mm -01 No.

31. Bean Size 4.5 mm -01 No.

32. Bean Size 5.0 mm- 01 No.

33. Bean Size 5.5 mm -01 No.

34. Bean Size 6.0 mm -01 No.

35. Bean Size 6.5 mm -01 No.

36. Bean Size 7.0 mm -01 No.

37. Bean Size 8.0 mm- 01 No.

38. Bean Size 9.0 mm -01 No.

39. Bean Size 10.0 mm -01 No.

40. Bean Size 11.0 mm- 01 No.

41. Bean Size 12.0 mm -01 No.

42. Wrench Box, socket size 25.4 mm (1")- 01 No.

43. Wrench Box, socket size 22.225 mm (7/8")- 01 No