Supply of Flexible Stainless Steel Hose for Choke

The company announces its need for Supply of flexible stainless steel hose for choke and kill lines Conforming to API Spec. 16C, FSL-3 as per the following minimum specifications:
1) Working Pressure : 5,000 PSI (351.53 kg / Cm2) Minimum.
2) Test Pressure : 7,500 PSI (527.30 kg / Cm2) Minimum.
3) Burst Pressure : 12,500 PSI (878.84 kg / Cm2) Minimum.
4) ID : 2 inches (50.80 mm) Minimum.
5) OD : 4 inches to 5 inches (101.60 mm - 127.00 mm).
6) Length : 66 feet. (- 0 / + 2 ft.).
7) Service Temp. Range: - 20 Deg. C to 100 Deg. C (Minimum range).
8) Minimum Bending Radius: 0.85m (for storage) & 1.25m (Inservice).
9) Weight : Maximum 35.0 kg/m (in air empty).
10) End connection : API 2.1/16" x 6B flanged x 5000 psi with RX-24 Stainless Steel / Inconel 625 lined Ring Groove and API 6A monogrammed (both End connectors should be of built-in integral either epoxy coflaxip type, ni-kanigen / nikaflex treated against corrosion or H2S resistant).
11) Protection : Full length stainless steel outer wrap for extra mechanical protection.
12) Handling : Lifting / handling collar at each end with safety clamps and chains for easier handling.
13) Additional Certification: NACE MR0175 latest revision/ISO 15156 for the couplings and lloyd's fire test
Od/1000/499 for the hose (Bidder to categorically confirm compliance of the same).