Gulf Oil and Gas accountACCOUNT
Supply of Drill Collars & Lifting Plugs
Casing, Tubing & Drill Pipes
Reference SDG0681P19/09
Date 2/27/2019
Location Asia
Scope The company announces its need for supply of drill collars & lifting plugs.

The instruments to be supplied are as follows: -

- Item 001 Qty=100 of Drill Collars (Spiral) and lifting plugs manufactured from AISI 4145 H modified alloy steel and fully heat treated to 285-341 Brinell hardness. The mechanical properties of the drill collar should meet API Spec. 7-1 requirements.
- Clause 10.A:
Type : Spiral grooved
Outside Diameter: 165.10 mm (6.1/2 inch)
Inside Diameter : 71.44 mm (2.13/16 inch)
Length : 9.45m (31 feet) +/- 6inch
Thread Connections : 101.60 mm (4inch) API IF RH (NC-46) Box up & pin down OD of Slip Recess : 152.40 mm (6 inch)
Length of Slip Recess : 533.40 mm (21 inch) minimum
Beginning of Slip Recess : 1066.80 mm (42 inch) from box end and furnished with pressed steel thread protectors installed at both ends.
Hardbanding: 254 mm (10 inch) long wear pad under slip recess & 102 mm (04 inch) long wear pad above slip recess
- Clause 10.B:Qty=50 Lifting Plug for above item no 10 having 165.10 mm (6.1/2inch) OD x 71.44 mm (2.13/16 inch) ID, 254.00 mm (10 inch) long neck, 228.60 mm (9inch) OD lifting plate/face and 101.60 mm (4inch) API IF RH (NC-46) pin connection with pressed steel thread protectors installed.The lifting Plugs must have 2 (two) numbers of through holes of 1 inch / 25.4 mm (approx ) diameter at 180 degree diametrically opposite with centres at 2 inch / 50.80 mm (approx) below the top end of the lifting plug.

- Item 002 Qty=24 of Drill Collars (Spiral) and lifting plugs manufactured from AISI 4145 Hmodified alloy steel and fully heat treated to 285-341 Brinell hardness.The mechanical properties of the drill collar should meet API Spec. 7-1 requirements.
- Clause 20.A :
Type : Spiral grooved
Outside Diameter: : 203.20 mm (8 inch)
Inside Diameter : 76.20 mm (3 inch)
Length : 9.45m (31 feet) +/- 6inch
Thread Connections : 168.275 mm (6.5/8 inch) API Reg. (RH) box up x pin down
OD of Slip Recess : 190.50 mm (7.1/2 inch)
Length of Slip Recess : 533.40 mm (21 inch) minimum
Beginning of Slip Recess : 1066.80 mm (42 inch) from box end and furnished with pressed steel thread protectors installed at both ends.
Hardbanding: 254 mm (10 inch) long wear pad under slip recess & 102 mm (04 inch) long wear pad above slip recess.
Clause 20.B:
Lifting Plug for above item no.20 having 203.20 mm (8 inch) OD x 71.44 mm (2.13/16 inch) ID, 254.00 mm (10 inch) long neck, 266.70 mm (10.1/2inch) OD lifting plate/face and 168.275 mm (6.5/8inch) API Reg. (RH) pin connection with pressed steel thread protectors installed. The Lifting Plugs must have two Nos. of through holes of 1inch/ 25mm (approx) dia at 180 degree diametrically opposite with centres at 2inch/50mm (approx) below the top end of the lifting plug.

- Item 003 Qty=21 of Drill Collars (Spiral) and lifting plugs manufactured from AISI 4145 H modified alloy steel and fully heat treated to 285-341 Brinell hardness.The mechanical properties of the drill collar should meet API Spec. 7-1 requirements.
Clause 30.A:
Type : Spiral grooved
Outside Diameter: : 241.30 mm (9.1/2 inch)
Inside Diameter : 76.20 mm (3 inch)
Length : 9.45m (31 feet) +/- 6inch
Thread Connections : 193.675 mm (7.5/8 inch) API Reg. (RH) box up x pin down
OD of Slip Recess : 228.60 mm (9 inch)
Length of Slip Recess : 533.40 mm (21 inch) minimum
Beginning of Slip Recess : 1066.80 mm (42 inch) from box end and furnished with pressed steel thread protectors installed at both ends.
Hardbanding: 254 mm (10 inch) long wear pad under slip recess & 102 mm (04 inch) long wear pad above slip recess.
Clause 30.B:
Lifting plug for above item No. 30 having 241.30 mm (9.1/2 inch) OD x 76.20 mm (3 inch) ID, 254.00 mm (10 inch) lonneck, 292.10 mm (11.1/2 inch) OD lifting face and 193.675 mm (7.5/8 inch) API Reg. (RH) pin connection with pressed steel thread protectors installed.The lifting Plugs must have 2 (two) numbers of through holes of 1 inch / 25.4 mm (approx ) diameter at 180 degree diametrically opposite with centres at 2 inch / 50.80 mm (approx) below the top end of the lifting plug.

Bidding Information

Bid Bond INR 2,117,000.00
Casing, Tubing & Drill Pipes
Related Prooducts: Casing, Tubing & Drill Pipes Blowout Preventers Ram, Rotary, Spherical & Annular Casing, Tubing & Drill Pipes Coiled Tubing Drill Bits and Cutters Extraction Equipment General Handling Tools Hoisting Systems Lubricating Equipment
Related Tenders: Blowout Preventers Ram, Rotary, Spherical & Annular Casing, Tubing & Drill Pipes Coiled Tubing Drill Bits and Cutters Extraction Equipment General Handling Tools

Related Articles

For Buyers
Advertise your Purchasing Requests

For Suppliers
Promote your Products
Gulf Oil and Gas
Copyright Universal Solutions All rights reserved. - Terms of Service - Privacy Policy.